Heating buffer tanks

One of our most important activities is the production of buffer tanks. These storage tanks are welded steel tanks without internal surface protection, therefore these can be used primarily as buffer tanks of heating systems operated by solar collectors or solid-fuel boilers. Tanks are produced witjout heat exchangers or also with internal welded carbon steel pipe heat exchangers.

As an option, MT tanks can be equipped with glazed inner tanks or stainless steel heat exchnagers for hot water.

Types manufactured:

• Type: KXT Heating buffertank

KXT 0WT

• Capacity:
• 500-2000 liter
• Operating temperature/pressure:
• 0 – 95 C°/ 3 bar
• Material quality:
• S235 JRG2
• Surface protection:
• Raw inside, coated outside
• Connections:
• According to DIN ISO 228-1
• Available as an option:
• Polyurethane insulation (100mm, 16 kg/m3)
  with zip fastener design
KXT 1WT

• Capacity:
• 500-2000 liter
• Operating temperature/pressure:
• 0 – 95 C°/ 3 bar
• Heat exchanger max pressure:
• max. 10bar
• Material quality:
• S235 JRG2
• Surface protection:
• Raw inside, coated outside
• Connections:
• According to DIN ISO 228-1
• Available as an option:
• Polyurethane insulation (100mm, 16 kg/m3)
  with zip fastener design
KXT 2WT

• Capacity:
• 500-2000 liter
• Operating temperature/pressure:
• 0 – 95 C°/ 3 bar
• Heat exchanger max pressure:
• max. 10bar
• Material quality:
• S235 JRG2
• Surface protection:
• Raw inside, coated outside
• Connections:
• According to DIN ISO 228-1
• Available as an option:
• Polyurethane insulation (100mm, 16 kg/m3)
  with zip fastener design

• Type: Mt Combi

Mt 0WT

• Capacity:
• 500-3000 liter
• Operating temperature/pressure:
• 0 – 95 C°/ 3 bar
• Material quality:
• S235 JRG2
• Surface protection:
• Raw inside, coated outside
• Connections:
• According to DIN ISO 228-1
• Available as an option:
• Polyurethane insulation (100mm, 16 kg/m3)
  with zip fastener design.
  HMV domestic hot water module (can be retrofitted)
  Flange cover (in case without HMV module usage)
Mt 1WT

• Capacity:
• 500-3000 liter
• Operating temperature/pressure:
• 0 – 95 C°/ 3 bar
• Heat exchanger max pressure:
• max. 10bar
• Material quality:
• S235 JRG2
• Surface protection:
• Raw inside, coated outside
• Connections:
• According to DIN ISO 228-1
• Available as an option:
• Polyurethane insulation (100mm, 16 kg/m3)
  with zip fastener design
  HMV domestic hot water module (can be retrofitted)
  Flange cover (in case without HMV module usage)
Mt 2WT

• Capacity:
• 500-3000 liter
• Operating temperature/pressure:
• 0 – 95 C°/ 3 bar
• Heat exchanger max pressure:
• max. 10bar
• Material quality:
• S235 JRG2
• Surface protection:
• Raw inside, coated outside
• Connections:
• According to DIN ISO 228-1
• Available as an option:
• Polyurethane insulation (100mm, 16 kg/m3)
  with zip fastener design
  HMV domestic hot water module (can be retrofitted)
  Flange cover (in case without HMV module usage)

HMV module - DN32x25


• Size:
• DN32-0,3 mm, 25m
• Heat transfer surface:
• 6,25 m2
• Water flow capability:
• 75 liter/min
• Operating pressure:
• 8 bar
• Operating temperature:
• 0-95 C°, with special seal 200°C

HMV module - DN32x33


• Size:
• DN32-0,3 mm, 33m
• Heat transfer surface:
• 8,25 m2
• Water flow capability:
• 75 liter/min
• Operating pressure:
• 8 bar
• Operating temperature:
• 0-95 C°, with special seal 200°C

For more information or for advice, contact us: Contacts